Table of Contents
Advertisement
indicator will flash. For further information on
reading the indicator, see page 22.
ECM00050
CAUTION:
Do not continue to run the engine if the
overheat warning indicator is on. Serious
engine damage will occur.
EMU26610
Trim meter
This gauge shows the trim angle of your out-
board motor.
NOTE:
Memorize the trim angles that work best for
your boat under different conditions. Adjust
the trim angle to the desired setting with the
power trim and tilt switch.
EMU26801
ECM00090
CAUTION:
Do not continue to operate the engine if a
warning device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU26813
Overheat warning
This engine has an overheat warning device.
If the engine temperature rises too high, the
warning device will activate.
Activation of warning device
The engine speed will automatically de-
G
crease to about 2000 r/min.
The overheat warning indicator will light (if
G
ZMU04715
equipped on the bottom cowling or the ta-
chometer).
ZMU04581
The buzzer will sound (if equipped on the
G
tiller handle, remote control box, or main
Basic components
Warning system
ZMU04746
ZMU04044
22
Advertisement
Table of Contents
