Auxiliary Devices; Using The Navigation System; Navigation Control Buttons - Chevrolet Volt 2012 Manual

Hide thumbs Also See for Volt 2012:
Table of Contents

Advertisement

Auxiliary Devices

This vehicle may have an auxiliary
input jack in the center console.
Possible auxiliary audio sources
include:
Laptop computer
MP3 player
Tape player
This jack is not an audio output.
Do not plug headphones into the
auxiliary input jack. Drivers are
encouraged to set up any auxiliary
device while the vehicle is in
P (Park).
Connect a 3.5 mm (1/8 in) cable
from the auxiliary device to the
auxiliary input jack. When a
device is connected, the system
automatically begins playing audio
from the device over the vehicle
speakers.
If an auxiliary device has already
been connected, but a different
source is currently active, do either
of the following to switch back to the
auxiliary source:
Press the HDD/DVD/AUX button
repeatedly to cycle through all
of the available audio source
screens, until the AUX source
screen is selected.
Press the HDD/DVD/AUX button
once, then press the AUX
source screen button.
Infotainment System
Navigation
Using the Navigation
System
Use the buttons on the navigation
system and the available screen
buttons on the navigation screen to
operate the system. See
.
Various functions are disabled when
the vehicle is moving.

Navigation Control Buttons

The buttons on the faceplate are
used to start primary functions while
using the navigation system. See
. These
buttons are:
BACK: Press to return to
the previous screen in a menu.
The
BACK button does not work
in primary screens, such as the
map, audio, leaf, or climate screens.
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents