Resetting The Ti-82 Stats - Texas Instruments TI-82 STATS Manual Book

Resetting the TI-82 STATS

RESET
Secondary Menu
Resetting All
Memory
The secondary menu gives you the option of resetting
RESET
all memory (including default settings) or resetting the default
settings while preserving other data stored in memory, such as
programs and functions.
Y=
Resetting all memory on the TI-82 STATS restores memory to
the factory settings. It deletes all nonsystem variables and all
programs. It resets all system variables to the default settings.
Tip: Before you reset all memory, consider restoring sufficient
available memory by deleting only selected data (page 18 .3).
To reset all memory on the TI-82 STATS, follow these steps.
1. Press y [
] to display the
MEM
2. Select to display the
5:Reset
3. Select
1:All Memory
menu.
4. Read the message below the
To cancel memory reset and return to the home screen,
select .
1:No
To erase from memory all data and programs, select
. All factory defaults are restored.
2:Reset
displayed on the home screen.
Note: When you clear memory, the contrast sometimes changes. If
the screen is faded or blank, adjust the contrast (Chapter 1).
MEMORY
secondary menu.
RESET
to display the
RESET MEMORY
RESET MEMORY
Memory Management 18–5
menu.
tertiary
menu.
is
Mem cleared