Table of Contents
Advertisement
Capacity
Motor
Blade FPM
Blade TPI
Blade Dimensions
Features
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARnInG: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
1.
Observe work area conditions. Do not use machines or power tools in damp or wet
2.
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
Keep children away. Children must never be allowed in the work area. Do not let
3.
them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
do not force tool. It will do the job better and more safely at the rate for which it was
5.
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
Use the right tool for the job. Do not attempt to force a small tool or attachment to
6.
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. Do not modify this tool and do not use this tool for a purpose for which
it was not intended.
dress properly. Do not wear loose clothing or jewelry as they can be caught in
7.
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ANSI-approved impact safety goggles.
8.
Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI-
approved dust mask or respirator when working around metal, wood, and chemical
dusts and mists.
SKU 47840
For technical questions, please call 1-800-444-3353.
Specifications
4-1/2" round, 4-1/2" x 4-1/2" Square
120 V / 60 Hz / 6 Amps / 700 Watts
0 ~ 230
14
44.7" L x 1/2" W x 0.25" Thick
3 Bearing Blade Guide, Trigger Lock
Save This Manual
Safety Warnings and Precautions
REV 05/05
Page 2
Hide quick links:
Advertisement
Table of Contents
