Playing An Audio Cd - Aiwa CSD-MP100 Operating Instructions Manual

CD OPERATION

Playing an audio CD

1
Select CD with FUNCTION.
The power is turned on.
2
Press z PUSH OPEN/CLOSE to open
the CD compartment and place the CD.
Place the CD with the label side up.
3
Close the lid of the CD compartment.
The total number of tracks and total playing time
are displayed.
4
Press E.
The current track number and its elapsed playing
time are displayed.
The player plays all the tracks once.
After listening, select TAPE/6STANDBY with
FUNCTION to turn the power off
Resume play function
Playback starts from the track you last stopped
playing. During stop, the track number to be played
are displayed.
To cancel the resume play to start play from the
beginning of the first track, press s in stop mode.
Resume play is also canceled when opening the CD
compartment, changing the function or turning the
power off.
Note
During programmed playback, this function does not
work.
6
ENGLISH
Additional operations
s - Stops play.
E - Pauses play. To resume play, press again. This
button has a tactile dot.
r or t - Skips back or forward to the beginning of
a track by pressing it repeatedly. Searches back or
forward for a point during playback or pause mode by
holding it down. Release it at the desired point.
VOLUME - Adjusts the volume.
T-BASS - Enhances low-frequency sound. Press to turn
it on or off.
REPEAT/MODE (or REPEAT on the remote) -
Repeats a single track ([ 1) or all tracks ([). Press
it to select the desired mode.
When repeating a single track, select the track with
r or t.
To locate a specific track directly with the
remote
Press the number buttons 1-9 and 0/10.
When selecting a track numbered over 10, press >10
first, then the corresponding number buttons.
When selecting a track numbered over 99, press >10
twice first, then the corresponding number buttons.
Example:
To play track number 25, press >10 first, then 2 and 5.
To play track number 30, press >10 first, then 3 and 0/
10.
To play track number 123, press >10 twice, then 1, 2
and 3.
Note
In programmed playback mode, locating the specific
track with the number buttons is not available.