Wds Settings - Tenda W268R User Manual

the security mode as WPA mode.

6.5 WDS Settings

WDS (Wireless Distribution System) is used to expand
wireless coverage area. This Router provides three modes:
Lazy, Bridge and Repeater.
Lazy: In this mode, the connected device can be Bridge
mode or Repeater mode and enter the Router's BSSID to
establish the connection.
Bridge: You can wirelessly connect two or more wired
networks via this mode. In this mode, you need to add
the Wireless MAC address of the connecting device into
the Router's AP MAC address table or select one from
the scanning table.
Repeater Mode：In this mode, add the opposing MAC
address into each own AP MAC address table by manual
or scanner to enlarge and extend the wireless radio.
11N Wireless Broadband Router
35