Specifications; Safety Warnings And Precautions - Chicago Electric 42818 Assembly And Operating Instructions Manual

ITEM
Power Consumption
Power Cord
Motor Speed
Fence Dimensions
Table Dimensions
Table Positive Stops
Cutting Capacity
Maximum Blade Height 17-7/8 inches
Saw Blade Tilt Capacity
Shaft Diameter
Miter Scale
Saw Blade
Features
Accessories
Net Weight
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be followed to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
SKU 42818

Specifications

110 VAC, 60 Hz, 1500 Watts, 2 HP
No load: 3A; Load: 6A; Startup: 8A
7 feet, UL approved, 16 AWG, polarized prongs
4800 RPM
22-3/4 x 2-1/2 inches
22-7/8 (W) x 4-1/4 (H) inches
0, 15, 22.5, 30, 45 (left and right) degree miter
3-11/16 (D) x 12-3/16 (L) inches at 90 deg. (front
to back); 1-1/4 (D) x 12-3/16 (L) inches at 45 deg.
(front to back)
90 to 45 degrees (right and left) miter
90 to 45 (right and left) degrees compound
1 inch arbor
0 ~ 60 degrees in one degree increments
12 inch, carbide tipped, 100 tooth
Push-down lock
Retractable blade guard
Single slide bar extension
Dust collector bag, Set Plate, Set Plate Holder,
Arbor Nut Wrench, Hex Wrench, 4 MM, Arbor
Adaptor 5/8" to 1"
53 lbs
Save This Manual

Safety Warnings and Precautions

Page 2
DESCRIPTION