Stopping; Docking - Yamaha EXCITER SE Owner's Manual

3
O
PERATION

STOPPING

300 FT (91 M)
The Jet Boat is not equipped with a
separate braking system. It is stopped
by water resistance after the throttle
lever is moved back to idle. From full
speed, the Jet Boat stops in approxi-
mately 300 ft (91 m) after the throttle is
moved back to idle. The stopping dis-
tance varies depending on gross
weight, water surface conditions, and
wind direction. The stated stopping dis-
tance should be used for a reference.
WARNING
You will lose steering control if you
completely pull the throttle levers
back to idle.
________________
3-18

DOCKING

1) Make sure no obstructions, boats or
swimmers are close to the Jet Boat.
Approach the dock from the port
side if possible. Come to a stop
before you reach the dock.
2) Notice how wind and water currents
are affecting boat movement as you
attach your mooring lines and fenders.
3) Approach the dock at idle speed.
Use reverse as necessary during
slow speed maneuvering to help
control speed
Position the boat according to wind
and water conditions.
Wind or current pushing boat away
from dock:
Slowly approach the dock at about a
45° angle. Secure the bow to the dock,
then use engine thrust or a boat hook
to gently move the stern to the dock.
WIND OR CURRENT
Wind or current pushing boat
toward dock:
Slowly maneuver to a shallow angle
and allow the boat to move toward the
dock.
and direction.