Option Menu - Mitsubishi Electric WD-60C10 Service Manual

MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-65638 / WD-73638 /
WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838

OPTION MENU

1. Press the <MENU> button on the remote control.
Press the buttons <2-4-7-0>. The screen will display the Option Menu.
2.
3.
The Option Menu for the V43C & V43 differs from the V43+ & V43++ chassis. V43C & V43 Option Menu
items are included in the Service Menu. See below.
V43C & V43 Option / Service Menu
<MENU><2-4-7-0>
Service Menu
1. Information
2. Reset All Settings
3. Calibration
4. Test Pictures
VERSION: Vxx xxx.xx.xx
SERVICE LEVEL INITIALIZATION
Service Level Initialization is used to restore all customer menu, video and audio settings to the original factory default
condition.
1. Enter the Option Menu <MENU><2-4-7-0>
2. V43C & V43 Chassis select "2. Reset All Settings" and <ENTER>. Then confirm "YES" <ENTER>..
V43+ & V43++ Chassis select "Initialize" and <ENTER>.
V43C & V43 Option / Service Menu
<MENU><2-4-7-0>
Service Menu
1. Information
2. Reset All Settings
3. Calibration
4. Test Pictures
VERSION: Vxx xxx.xx.xx
OPTION MENU
V43+ & V43++ Option Menu
<MENU><2-4-7-0>
Initialize
Power Restore
Production Mode
Digital Signal Strength
NetCommand Software
Total hours of use
V43+ & V43++ Option Menu
<MENU><2-4-7-0>
Initialize
Power Restore
Production Mode
Digital Signal Strength
NetCommand Software
Total hours of use
Page 26
OFF
OFF
<1~9>
Vxx xxx.xx
0
OFF
OFF
<1~9>
Vxx xxx.xx
0