•
To change alarm hour in alarm setting mode
•
To stop the alarm
•
To switch on the backlight
OUT key (Outdoor) :
•
To toggle between the current / minimum/
maximum outdoor temperature and humidity
•
Press for around 3 seconds to reset the outdoor
maximum and minimum temperature and humidity
records (will reset all records to current level of the
relative transmitter being reset- each transmitter's
data must be reset separately)
Note
:
The
temperature will be reset to default time as well.
•
To change minute, day, month units in setting
modes
Note : In 24hr time display mode, the month is set by
using the OUT key. In 12hr time display mode, the
day is set by using the OUT key
•
To change alarm minute in alarm setting mode
•
To stop the alarm
•
To switch on the backlight
CH key (Channel) :
•
To toggle between the Thermo-Hygro outdoor
transmitters 1, 2 and 3 (if more than 1 transmitter
is used)
•
To exit manual setting mode and alarm setting
mode
•
To stop the alarm
•
To switch on the backlight
AL1 key (Alarm 1) :
•
To display the time set for Alarm ((1)) and to
simultaneously switch Alarm ((1)) ON/ OFF
•
Press for about 3 seconds to enter the Alarm ((1))
setting mode
•
To stop the alarm
•
To switch on the backlight
time/date
information
31
of
MIN/MAX