La Crosse Technology WIRELESS WEATHER STATION Instruction Manual page 4

finally positioned (see notes on "Positioning" and
"433 MHz Reception").
7. If after 10 minutes, the DCF time has not been
received, use the SET key to manually enter a
time. The clock will automatically attempt to
receive the DCF time at each full hour. When this
is successful, the received time will override the
manually set time. The date is also updated with
the received time. (Please refer also to notes on
"Radio
"Manual Time Setting").
HOW TO INSTALL AND REPLACE BATTERIES IN
THE WEATHER STATION
The Weather Station uses 2 x AA, IEC LR6, 1.5V
batteries. When batteries will need to be replaced, the
low battery icon will appear on the LCD. To install and
replace the batteries, please follow the steps below :
HOW TO INSTALL AND REPLACE BATTERIES IN
THE THERMO-HYGRO TRANSMITTER
The Thermo-Hygro transmitter uses 2 x AA, IEC LR6,
1.5V batteries. To install and replace the batteries,
please follow the steps below:
controlled
1. Lift
compartment and remove the
cover.
2. Insert batteries observing the
correct polarity (see marking).
3. Replace compartment cover.
1.
2.
3.
28
Time Reception"
up
Remove the battery cover.
Insert the
observing
polarity (see marking).
Replace the battery cover
on the unit.
and
the battery
batteries,
the correct