La Crosse Technology WIRELESS WEATHER STATION Instruction Manual page 6

LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before
reinserting them.
4. The outdoor temperature and humidity from the first transmitter (channel 1) should then be
displayed on the Weather station. Also, the signal reception icon will be displayed. If this
does not happen after 2 minutes, the batteries will need to be removed from both units
and reset from step 1.
5. Insert the batteries to the second transmitter as soon as the outdoor temperature &
humidity readings from the first transmitter are displayed on the Weather station.
Note: User shall insert the batteries into the second transmitter within 10 seconds of reception
of the first transmitter.
6. The outdoor data from the second transmitter and the "channel 2" icon should then be
displayed on the Weather station. If this does not happen after 2 minute, the batteries will
need to be removed from all the units and reset from step 1.
7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and outdoor
data are displayed on the Weather station. Then within 2 minutes, the channel 3 outdoor
data from the third transmitter will be displayed and the channel icon will shift back to "1"
once the third transmitter is successfully received. If this is not happen, user shall restart
the setting up from step 1.
Note:
•
User shall insert the batteries into the third transmitter within 10 seconds of reception of
55