La Crosse Technology DCF-77 Instruction Manual page 3

Wireless 868 mhz weather station

Hide thumbs Also See for DCF-77:

Table of Contents

Enlarged version

The Outdoor Temperature Transmitter

Remote transmission of outdoor

temperature to Weather station by 868

MHz signals

Shower proof casing

Wall mounting and table-standing

SETTING UP:

Note: This weather station receives only one outdoor transmitter.

First, insert the batteries into the Temperature transmitter. (see

"Install and replace batteries in the Temperature transmitter").

Immediately after and within 30 seconds, insert the batteries into

Weather station (see "Install and replace batteries in the

Weather station"). Once the batteries are in place, all segments of

the LCD will light up briefly. Following the time as

weather

icon will be displayed. If these are not displayed after 60

seconds, remove the batteries and wait for at least

before reinserting them.

After inserting the batteries, the Weather station will start receiving

data from the transmitter. The outdoor temperature and the signal

reception icon should then be displayed on the Weather station. If

this does not happen after 3 minutes, the batteries will need to be

removed from both units and reset from step 1.

In order to ensure sufficient 868 MHz transmission however, this

should under good conditions be a distance no more than 100

meters between the final position of the Weather Station and the

transmitter (see notes on "Mounting" and "868 MHz Reception").

0:00

and the

seconds

Table of Contents