Select Source - Teac DVD Dupli 14/4 User Manual

4.8 Select Source

Function 8.Select Source is to let you select the data on DVD/CD source
drive, DVD/CD Writers or the optional HDD as the source from which
copying will be done.
Select function 8.
Press ENT, and then press V W to select the source as shown below.
After selecting the source, you can press ENT, and LCD will show the
message as follows.
Suppose you select the optional HDD as the source and try to copy
from one of its partitions, but the partition contains no data, an error
message will appear on LCD. At this moment, you can switch to an-
other partition that contains data, or use function 9 Image to load the
data into the chosen partition first.
86
8.Select Source
Src: DVD-ROM
01 IDE1 Master
DVD-ROM selected!
4. Functions