Send Service Commands; Cell Broadcast; Messaging Settings; Text Message Settings - Nokia E71 User Manual

To view information about the sender, web address,
expiration date, and other details of the message
before downloading it, select
details.

Send service commands

You can send a service request message (also known
as a USSD command) to your service provider and
request activation for certain network services. Contact
your service provider for the service request text.
To send a service request message, select
Service command. Enter the service request text and
select Options > Send.

Cell broadcast

Select Menu Communic.
>
Options Cell broadcast.
>
With the cell broadcast network service, you can
receive messages on various topics from your service
provider, such as weather or traffic conditions in a
particular region. For available topics and relevant
topic numbers, contact your service provider. Cell
broadcast messages cannot be received when the
device is in the remote SIM mode. A packet data (GPRS)
connection may prevent cell broadcast reception.
Cell broadcast messages cannot be received in UMTS
(3G) networks.
To receive cell broadcast messages, you may need to
set the cell broadcast reception on. Select
Settings Reception > On.
>
Options Message
>
Options
>
Messaging
> >
Options
>
To view messages related to a topic, select the topic.
To receive messages related to a topic, select
Options > Subscribe.
Tip: You can set important topics as hot topics.
While the device is in the standby mode, you are
notified when you receive a message related to
a hot topic. Select a topic, and select
Hotmark.
To add, edit, or delete topics, select
Topic.

Messaging settings

Select Menu Communic.
>
Options > Settings.
Fill in all fields marked with
a red asterisk.
Your device may recognise the SIM card provider and
configure the correct text message, multimedia
message, and GPRS settings automatically. If not,
contact your service provider for the correct settings,
order the settings from your service provider in a
configuration message, or use the Settings wizard
application.

Text message settings

Select Menu Communic.
>
Options Settings
> >
Select from the following:
Options
Options
>
Messaging
> >
Must be defined or with
Messaging
> >
Text message.
>
61