Security Tips - Nokia E71 User Manual

Before pairing, decide on your own passcode (1-16
digits), and agree with the user of the other device to
use the same code. Devices that do not have a user
interface have a fixed passcode. You need the passcode
only when you connect the devices for the first time.
After pairing, it is possible to authorise the connection.
Pairing and authorising the connection makes
connecting quicker and easier, as you do not have to
accept the connection between paired devices every
time you establish a connection.
The passcode for remote SIM access must have 16
digits.
1. Select Options New paired
>
starts to search for Bluetooth devices within range.
If you have sent data using Bluetooth before, a list
of the previous search results is displayed. To search
for more Bluetooth devices, select
2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered to the other device as well.
3. Select Yes to make the connection between your
device and the other device automatic, or
confirm the connection manually every time a
connection attempt is made. After pairing, the
device is saved to the paired devices page.
To give a nickname to the paired device, select
Options Assign short
>
displayed in your device.
To delete a pairing, select the device whose pairing you
want to delete and Options
pairings, select Options
currently connected to a device and cancel the pairing
device. The device
More devices.
No to
name. The nickname is only
> Delete. To delete all
Delete all. If you are
>
with that device, pairing is removed immediately, and
the connection is ended.
To allow a paired device to connect automatically to
your device, select Set as
between your device and the other device can be made
without your knowledge. No separate acceptance or
authorisation is needed. Use this status for your own
devices, such as your compatible headset or computer,
or devices that belong to someone you trust. If you
want to accept connection requests from the other
device separately every time, select
unauthorised.
To use a Bluetooth audio enhancement such as a
Bluetooth handsfree or headset, you need to pair your
device with the enhancement. See the enhancement
user guide for the passcode and further instructions.
To connect to the audio enhancement, switch on the
enhancement. Some audio enhancements connect
automatically to your device. Otherwise open the
paired devices tab, scroll to the enhancement, and
select Options Connect to audio
>

Security tips

When you are not using Bluetooth connectivity, select
Bluetooth Off or My phone's visibility
>
Hidden.
Do not pair with an unknown device.
authorised. Connections
Set as
device.
>
107