Server Profiles; Server Profile Settings - Nokia N73-5 User Manual

If an update is available, information about it is displayed.
Select Accept to accept to download the update or
to cancel the download. The download may take several
minutes. You can use your device during the download.
The downloading of software updates may involve the
transfer of large amounts of data. Contact your service
provider for information on charges for data transmissions.
Ensure that the battery of your device has enough power
or connect the charger before you start the update.
Warning: If you install a software update,
you cannot use the device, even to make
emergency calls, until the installation is completed
and the device is restarted. Be sure to backup data
before accepting the installation of an update.
When the download is complete, select
Accept to install the update, or
using Options > Install update. The installation may take
several minutes.
The device updates the software and restarts. To complete
the update, select OK. When asked, select an internet
access point. Your device sends the software update status
to the server.
To view the server profile settings used for software
updates, select Options > Settings.
Cancel
Yes and then
No to install it later by
Copyright © 2007 Nokia. All rights reserved.

Server profiles

Press , and select Tools
You may receive server profiles and different
configuration settings from your service providers, or
company information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select
Start configuration.
To create a new server profile, select
server profile. To edit a server profile, select
Edit profile.

Server profile settings

Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your
device to the server.
Access point—Select an access point to be used when
connecting to the server.
> Device mgr., and press
Options >
Options > New
Options >
.
85