Speed Dial A Phone Number; Voice Dialing - Nokia N73-5 User Manual

Options > Conference
to the conference call.
To drop a participant, select
Drop participant, scroll to the participant, and select
Drop.
4
To end the active conference call, press

Speed dial a phone number

To activate speed dialing, press
Settings > Call >
To assign a phone number to one of the speed dialing keys
( — ), press
Scroll to the key to which you want to assign the phone
number, and select
the voice mailbox.
To call in the standby mode, press the speed dial key and
.

Voice dialing

Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker's voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user's voice to recognize the voice commands better.
68
> Add to conference
Options > Conference
, and select
Speed dialling > On.
, and select Tools > Spd.
Options > Assign. is reserved for
Copyright © 2007 Nokia. All rights reserved.
to return The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesized
> voice tag, open a contact card, and select
voice tag.
Make a call with a voice tag
.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you
should not rely solely upon voice dialing in all
Tools >
circumstances.
When you use voice dialing, the loudspeaker is in use.
Hold the device at a short distance away when you say the
dial.
voice tag.
1 To start voice dialing, in the standby mode, press and
hold the right selection key. If you are using a
compatible headset with the headset key, press and
hold the headset key to start voice dialing.
2
A short tone is played, and
Say clearly the name or nickname that is saved on the
contact card.
3
The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a timeout of
2.5 seconds, the device dials the number.
If the recognized contact was not correct, select
to view a list of other matches, or
dialing.
Options > Play
Speak now is displayed.
Next
Quit to cancel voice