Download Print this page

Panasonic CQ-C1001NW Operating Instructions

Cd player/receiver
Hide thumbs Also See for CQ-C1001NW:

Advertisement

Quick Links

Specifications
General
FM Stereo Radio
Power Supply
: 12 V DC (11 V – 16 V), Negative
Frequency Range
: 87.5 MHz – 108 MHz
Ground
Usable Sensitivity
: 6 dB/µV (S/N 30 dB)
Tone Controls (Bass)
: ±12 dB (100 Hz)
Stereo Separation
: 35 dB (1 kHz)
Tone Controls (Treble)
: ±12 dB (10 kHz)
AM (MW) Radio
Current Consumption
: Less than 2.5 A (CD mode, 0.5 W
4 channels)
Frequency Range
: 531 kHz – 1 602 kHz
: 45 W x 4 (4 Ω)
Maximum Power Output
Usable Sensitivity
: 28 dB/µV (S/N 20 dB)
: 4 – 8 Ω
Speaker Impedance
AM (LW) Radio
Pre-Amp Output Voltage
: 2.5 V (CD mode, 1 kHz, 0 dB)
: 200 Ω
Pre-Amp Output Impedance
Frequency Range
: 153 kHz – 279 kHz
Dimensions (Main Unit)
: 178(W) x 50(H) x 160(D) mm
Usable Sensitivity
: 32 dB/µV (S/N 20 dB)
Weight (Main Unit)
: 1.3 kg
CD Player
Sampling frequency
: 8 times oversampling
DA converter
: 1 bit DAC System
Pick-up type
: Astigma 3-beam
Light source
: Semiconductor laser
Wave length
: 790 nm
Frequency response
: 20 Hz – 20 kHz (±1 dB)
Notes:
Signal to noise ratio
: 96 dB
Total harmonic distortion
: 0.01 % (1 kHz)
¡
Specifications and design are subject to modification without
Wow and flutter
: Below measurable limits
notice due to improvements.
Channel separation
: 75 dB
¡
Some figures and illustrations on this manual may be different
from real ones.
Accessories
Operating Instructions
Lock Cancel Plate
Notes:
(English
: YFM284C454ZA)
(FX0214C385ZA)
¡
The number in parentheses underneath
(Deutsch
: YFM284C455ZA)
Q'ty: 2
each accessory part name is the part
(Français
: YFM284C456ZA)
Mounting Bolt
number for maintenance and service.
(Nederlands : YFM284C457ZA)
(YEJV014C002N)
¡
Accessories and their part numbers are
(Svenska
: YFM284C458ZA)
Q'ty: 1
subject to modification without prior
(Italiano
: YFM284C459ZA)
Mounting Collar
notice due to improvements.
(Español
: YFM284C460ZA)
(FX0214C384ZA)
¡
Mounting Collar and Trim Plate are
(Dansk
: YFM284C461ZA)
Q'ty: 1
mounted on the main unit at shipment.
Q'ty: 1 set
Trim Plate
Installation Instructions
(YFC054C079ZA)
(English, Deutsch, Français,
Q'ty: 1
Nederlands
: YFM284C466ZA)
Power Connector
(Svenska, Italiano, Español,
(YEAJ02874)
Dansk
: YFM284C467ZA)
Q'ty: 1
Q'ty: 1 set
Warranty Card
Q'ty: 1
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
YFM284C454ZC TAMACO1004-2055
Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine
exterior cleaning. Never use benzine, thinner, or other solvents.
If the replaced fuse fails, contact your nearest authorized Panasonic Service Centre.
Warning
¡ Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse could cause fire or damage to the unit. If the replaced fuse fails, contact your nearest author-
ized Panasonic Service Centre.
Anti-Theft System
This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable.
Caution
¡ Do not touch the contacts on the face plate and the
¡ This face plate is not waterproof. Do not expose it to
main unit, since this may result in poor electrical con-
water or excessive moisture.
tact.
¡ Do not remove the face plate while driving your car.
¡ If dirt or other foreign substances get on the contacts,
¡ Do not place the face plate on the dashboard or nearby
wipe them off with a clean and dry cloth.
areas where the temperature rises high.
Removing
Mounting
1
1
Turn off the power.
Slide the left side of the face plate in
2
place.
Press [
]. The face plate will open.
2
3
Press the right end of face plate until a
Pull it out toward you.
"click" is heard.
1
1
2
CQ-C1021NW/C1011NW/C1001NW
Operating Instructions
BAND
CQ-C1021N
PTY
APM
SEL
SEL
SEL
PWR
CT
MUTE/SQ
RANDOM
SCAN
REPEAT
TA
AF
SRC
DISP
1
2
3
4
5
6
(CQ-C1021NW)
¡Please read these instructions carefully before using this product and keep this manual for future reference.
Printed in China
Troubleshooting
If You Suspect Something Wrong
Warning
Check and take steps as described below.
¡ Do not use the unit in an irregular condition, for example, with-
If the described suggestions do not solve the problem, it is recom-
out sound, or with smoke or a foul smell, which can cause
mended to take the unit to your nearest authorized Panasonic Service
ignition or electric shock. Immediately stop using the unit and
Centre. The product should be serviced only by qualified personnel.
consult your dealer.
¡ Never try to repair the unit by yourself because it is dangerous
Please refer the checking and the repair to professionals. Panasonic
to do so.
shall not be liable for any accidents arising out of neglect of checking
the unit or your own repair after your checking.
Trouble
Check point
Trouble
Common
Disc Player
Start the engine. (Or turn the ignition
No sound, or disc
switch to the ACC position.)
is automatically
Verify the wiring. (Ex. battery lead,
ejected
power lead, ground lead, etc.)
Sound skip,
No power
Fuse blown (Contact the nearest
poor sound
Panasonic Service Centre.)
Ask a professional for fuse replace-
quality
ment.
Sound skip
Be sure to use the same rated fuse.
due to
Disable the mute function.
vibration
Verify the wiring.
No sound
Wait until the dew disappears before
Disc not
turning on the unit.
ejectable
Make sure that grounding is established
Noise
properly.
Error Display Messages
No sound from
Adjust the balance and fader.
left, right, front,
Verify the wiring.
or rear speaker
Left and right
sounds are
Connect the speaker lead correctly.
reversed
Radio
Tune into another station of high-inten-
Frequent
sity waves.
noise
Make sure that the antenna mounted
point is grounded properly.
The preset memory is cleared to return
Preset data
to the original factory setting when the
deleted
power connector or battery is discon-
nected.
2
Before Reading These Instructions
Panasonic welcomes you to our constantly growing family of electronic products owners.
CD Player/Receiver
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and
assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of
enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family.
This operating instruction manual is for 3 models CQ-C1021NW, CQ-C1011NW and CQ-C1001NW. All illustrations throughout
this manual represent model CQ-C1021NW unless otherwise specified. The following table describes the differences among 3
models.
Models
Features
Display colour
Key/disc slot illumination colour
Label Indications and Their Locations
CAUTION
LASER RADIATION WHEN OPEN. DO NOT STARE
INTO BEAM.
Caution
This product utilizes a laser.
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
Do not take apart this unit or attempt to
make any changes yourself.
This unit is a very intricate device that uses a laser
pickup to retrieve information from the surface of
compact discs. The laser is carefully shielded so that
its rays remain inside the cabinet.
Therefore, never try to disassemble the player or alter
any of its parts since you may be exposed to laser
rays and dangerous voltages.
Safety Information
Read the operating instructions for the unit and all other compo-
nents of your car audio system carefully before using the system.
They contain instructions about how to use the system in a safe and
effective manner. Panasonic assumes no responsibility for any prob-
lems resulting from failure to observe the instructions given in this
manual.
This pictograph intends to alert you to the presence of
important operating instructions and installation instruc-
tions. Failure to heed the instructions may result in
Warning
severe injury or death.
Check point
Warning
Load the disc correctly.
Clean the disc.
Observe the following warnings when using this
unit.
❑ The driver should neither watch the display nor operate
Clean the disc.
the system while driving.
Watching the display or operating the system will distract the driv-
er from looking ahead of the vehicle and can cause accidents.
The maximum permissible tilt angle is
Always stop the vehicle in a safe location and use the parking
30°.
brake before watching the display or operating the system.
Secure the unit.
❑ Use the proper power supply.
This product is designed for operation with a negative grounded
Press [
u
]. If the disc is still not eject-
12 V DC battery system. Never operate this product with other bat-
tery systems, especially a 24 V DC battery system.
ed, contact the nearest Panasonic
❑ Protect the Deck Mechanism.
Service Centre.
Do not insert any foreign objects into the slot of this unit.
❑ Do not disassemble or modify the unit.
Do not disassemble, modify the unit or attempt to repair the prod-
uct yourself. If the product needs to be repaired, consult your
dealer or an authorized Panasonic Service Centre.
(The disc is ejected automatically.)
❑ Do not use the unit when it is out of order.
The disc is dirty, or is upside down.
If the unit is out of order (no power, no sound) or in an abnormal
state (has foreign objects in it, is exposed to water, is smoking, or
The disc has scratches.
smells), turn it off immediately and consult your dealer.
Check the disc.
❑ Refer fuse replacement to qualified service personnel.
When the fuse burns out, eliminate the cause and have it replaced
with the fuse prescribed for this unit by a qualified service engi-
neer. Incorrect replacement of the fuse may lead to smoke, fire,
No operation by some cause.
and damage to the product.
If normal operation is not restored, call
the store where you purchased the unit
or the nearest Panasonic Service
Centre to ask for repairs.
Preparation
The 24-hour system is used for the clock.
Notes:
¡
Adjust the clock when "NO CT" appears on the dis-
play.
¡
When a broadcast of FM Radio Data System is
received, the clock is set automatically by the CT
(Clock Time) service.
¡
Hold down []]
1
Select the radio AM mode.
CQ-C1021NW
CQ-C1011NW
CQ-C1001NW
(a
"Radio (AM [LW/MW]/FM)")
Blue
Black
Black
Red
Red
Green
2
Hold down [DISP] (CT) for more than 2
seconds.
3
Adjust the hour.
CLASS 1 LASER PRODUCT
[[]: sets the hour ahead.
[]]: sets the hour back.
4
Press [DISP] (CT).
5
Adjust the minute.
Caution Label
[[]: sets the minute ahead.
CAUTION - LASER RA-
VAR OITU S – LASER -
DIATION WHEN OPEN.
SÄTEILYVAARA
[]]: sets the minute back.
AVOID EXPOSURE TO
AVATT AESS A.
VAR O
BEAM.
ALTISTUMISTA
6
SÄTEELLE.
Press [DISP] (CT).
VORSICHT - LASER-
STRAHLUNG,
WENN
FÖRSIKTIGHET –
GEÖFFNET. VERMEIDEN
LASERSTRÅLNING I
SIE EIN AUSSETZEN
ÖPPNAT LÄGE. UNDVIK
GEGENÜBER
DEM
ATT UTSÄTTAS FÖR
LASERSTRAHL.
STRÅLEN.
ATTENTION –
ADV ARS EL – LA SER -
RAYONNEMENT LASER
SI OUVERT, ÉVITER
STRÅLING.
UNNGÅ
TOUTE EXPOSITION AU
EKSPO N ERIN G
F OR
FAISCEAU.
STRÅLEN VED ÅPNING.
ÇçàåÄçàÖ – ãÄáÖêçéÖ
ADVARSEL – LASER
àáãìóÖçàÖ
èêà
UDSENDES NÅR DER
éíäêõíàà.
àáÅÖÜÄíú
ER ÅBNET. UNDGÅ
ÇéáÑÖâëíÇàü ãÄáÖêçéÉé
UDSÆTTELSE FOR
àáãìóÖçàü.
STRÅLER.
Deck Ass'y (in the unit,
upper side)
This manual uses pictographs to show you how to use the product
safely and to alert you to potential dangers resulting from improper
Caution
connections and operations. The meanings of the pictographs are
explained below. It is important that you fully understand the mean-
Observe the following cautions when using this
ings of the pictographs in order to use this manual and the system
unit.
properly.
❑ Keep the sound volume at an appropriate level.
Keep the volume level low enough to be aware of road and traffic
conditions while driving.
This pictograph intends to alert you to the presence of
❑ This unit is designed for use exclusively in automo-
important operating instructions and installation instruc-
biles.
tions. Failure to heed the instructions may result in
Caution
❑ Do not operate the unit for a prolonged period with the
injury or material damage.
engine turned off.
Operating the audio system for a long period of time with the
engine turned off will drain the battery.
❑ Do not expose the unit to direct sunlight or excessive
Observe the following warnings when installing.
heat.
❑ Disconnect the lead from the negative (–) battery termi-
Otherwise these will raise the interior temperature of the unit,
nal before installation.
and it may lead to smoke, fire, or other damage to the unit.
Wiring and installation with the negative (–) battery terminal con-
❑ Do not use the product where it is exposed to water,
nected may cause electrical shock and injury due to a short circuit.
moisture, or dust.
Some cars equipped with the electrical safety system have specific
Exposure of the unit to water, moisture, or dust may lead to
procedures of battery terminal disconnection.
smoke, fire, or other damage to the unit. Make especially sure
FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE
that the unit does not get wet in car washes or on rainy days.
UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM
RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL
INJURY OR DEATH.
❑ Never use safety-related components for installation,
grounding, and other such functions.
Do not use safety-related vehicle components (fuel tank, brake,
suspension, steering wheel, pedals, airbag, etc.) for wiring or fix-
ing the product or its accessories.
❑ Installing the product on the air bag cover or in a location
where it interferes with airbag operation is prohibited.
❑ Check for piping, gasoline tank, electric wiring, and other
items before installing the product.
If you need to open a hole in the vehicle chassis to attach or wire
the product, first check where the wire harness, gasoline tank, and
electric wiring are located. Then open the hole from outside if pos-
sible.
❑ Never install the product in a location where it interferes
with your field of vision.
❑ Never have the power cord branched to supply other
equipment with power.
❑ After installation and wiring, you should check the nor-
mal operation of other electrical equipment.
The continuation of their using in abnormal conditions may cause
fire, electrical shock or a traffic accident.
❑ In the case of installation to an airbag-equipping car,
confirm warnings and cautions of the vehicle manufactur-
Sales and Support Information
er before installation.
❑ Make sure the leads do not interfere with driving or get-
For UK and Ireland customers only.
ting in and out of the vehicle.
❑ Insulate all exposed wires to prevent short circuiting.
Customer Care Centre
¡ For customers within the UK: 08705 357357
¡ For customers within the Republic of Ireland: 01 289 8333
¡ Visit our website for product information
¡ E-mail: customer.care@panasonic.co.uk
or
[[]
to change numbers rapidly.
Hour blinks
Hour entered
Minute blinks
Minute entered
Completed
Observe the following cautions when installing.
❑ Refer wiring and installation to qualified service per-
sonnel.
Installation of this unit requires special skills and experience. For
maximum safety, have it installed by your dealer. Panasonic is
not liable for any problems resulting from your own installation
of the unit.
❑ Follow the instructions to install and wire the product.
Not following the instructions to properly install and wire the
product could cause an accident or fire.
❑ Take care not to damage the leads.
When wiring, take care not to damage the leads. Prevent them
from getting caught in the vehicle chassis, screws, and moving
parts such as seat rails. Do not scratch, pull, bend or twist the
leads. Do not run them near heat sources or place heavy objects
on them. If leads must be run over sharp metal edges, protect
the leads by winding them with vinyl tape or similar protection.
❑ Use the designated parts and tools for installation.
Use the supplied or designated parts and appropriate tools to
install the product. The use of parts other than those supplied or
designated may result in internal damage to the unit. Faulty
installation may lead to an accident, a malfunction or fire.
❑ Do not block the air vent or the cooling plate of the unit.
Blocking these parts will cause the interior of the unit to over-
heat and will result in fire or other damage.
❑ Do not install the product where it is exposed to strong
vibrations or is unstable.
Avoid slanted or strongly curved surfaces for installation. If the
installation is not stable, the unit may fall down while driving and
this can lead to an accident or injury.
❑ Installation Angle
The product should be installed in a horizontal position with the
front end up at a convenient angle, but not more than 30˚.
The user should bear in mind that in some areas there may be
restrictions on how and where this unit must be installed.
Consult your dealer for further details.
❑ Wear gloves for safety. Make sure that wiring is com-
pleted before installation.
❑ To prevent damage to the unit, do not connect the
power connector until the whole wiring is completed.
❑ Do not connect more than one speaker to one set of
speaker leads. (except for connecting to a tweeter)
Direct Sales at Panasonic UK
¡ Order accessories and consumable items for your product
with ease and confidence by phoning our Customer Care
Centre Monday - Thursday 9:00am - 5:30pm, Friday
9:30am - 5:30pm. (Excluding public holidays).
¡ Or go on line through our Internet Accessory ordering
application at www.panasonic.co.uk.
¡ Most major credit and debit cards accepted.
¡ All enquiries, transactions and distribution facilities are
provided directly by Panasonic UK Ltd.
¡ It couldn't be simpler!
¡ Also available through our Internet is direct shopping for a
wide range of finished products, so take a browse on our
website for further details.

Advertisement

loading

Summary of Contents for Panasonic CQ-C1001NW

  • Page 1 When a broadcast of FM Radio Data System is Tone Controls (Treble) : ±12 dB (10 kHz) This operating instruction manual is for 3 models CQ-C1021NW, CQ-C1011NW and CQ-C1001NW. All illustrations throughout AM (MW) Radio Current Consumption : Less than 2.5 A (CD mode, 0.5 W received, the clock is set automatically by the CT this manual represent model CQ-C1021NW unless otherwise specified.
  • Page 2 General Radio (AM [LW/MW]/FM ) Audio Settings ▲ ▼ ▲ ▼ [BAND] (MONO/LOC) (Mono/local) [VOLUME ] [VOLUME ] or [ lights while receiving an FM stereo signal. Display change selects a band in the radio source. selects MONO/LOCAL on/off in the FM mode adjusts the volume.
  • Page 3 ●Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik. Power Connector Versorgungsstecker Matsushita Electric Industrial Co., Ltd. Connecteur d’alimentation Web Site : http://www.panasonic.co.jp/global/ Stroomstekker YEAJ02874 YFM284C466ZB TAMACO1004-1124 Printed in China Installation/Einbau/Montage/Installatie How to install the unit/Einbau des Gerätes/Mode de montage de l’appareil/Installeren van het toestel...
  • Page 4 Motor Antenna Relay Control Lead To Motor Antenna. (Max. 100 mA) (This lead is not intended for use with a switch actuated power antenna) Amp·Relay Control Power Lead To Panasonic power amplifier. (Max. 100 mA) (synchronized with the power on/off of amplifier) Steuerkabel für Relais der motorbetriebenen Antenne Zu motorbetriebenen Antenne (max.

This manual is also suitable for:

Cq-c1011nwCq-c1021nwCqc1001nw