Cassette Tape; Pm33Db; Only) - Panasonic SC-PM33DB Operating Instructions Manual

Cassette tape (

PM33DB

CLEAR
Basic play Basic play
1 Press [0] on top of the unit. Insert the cassette.
Forward side
2 Close the lid by hand.
Press [TAPE 3] to start play.
3
To play the other side of the cassette, turn the cassette over.
To Action
Press [ 7 ].
stop tape playback
Press [TAPE 3] when the unit is OFF with
start one-touch play
the cassette loaded.
fast-forward and Press [ /REW/4] or [ /FF/¢] in the
rewind stop mode.
Note
• Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
• Endless tapes can get caught up in the deck's moving parts if used
incorrectly.
TPS (Tape Program Sensor) TPS (Tape Program Sensor)
This function enables you to search the beginning of a track,
up to a maximum of 9.
Press [ /REW/4] or [ /FF/¢] during play.
Play resumes from the track found.
Note
TPS may not function properly:
• with short silent parts
• when noise occurs between tunes
• if silent parts are found within tunes
Recording Recording
Use normal position tapes.
High position and metal position tapes can be used, but this
unit will not be able to record or erase them correctly.
Preparation
Wind the leader tape so that recording can begin
immediately.

only)

Top of unit
Insert inside the
guides
Recording the radio Recording the radio
1 Insert the cassette to be recorded.
2 Tune to the required station (refer to page 12).
8
3 Press [¶ REC/ ] to start recording.
Recording discs Recording discs
Insert the cassette to be recorded.
1
Press [0] to insert the disc. Press again to close.
2
8
Press [CD 3/
] and then [7, –DEMO].
3
4 Press [PLAY MODE] to select your desired mode
(refer to page 9).
8
Press [¶ REC/ ] to start recording.
5
Recording programmed tracks Recording programmed tracks
1 Insert the cassette to be recorded.
2 Program the tracks you want (refer to page 10).
8
3 Press [¶ REC/ ] to start recording.
Other basic operations Other basic operations
To Action
Press [ 7 ].
stop recording
stop recording
1) Press [¶ REC
temporarily
2) Press again to resume recording.
record on the other Turn the cassette over and press
side of the tape
[¶ REC
erase a recorded 1) Insert the cassette to be recorded.
2) Press [TAPE 3] and then [7, –DEMO].
sound
3) Press [¶ REC/
Your attention is drawn to the fact that recording pre-
recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
Erasure prevention Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Side A
Tab for side B Tab for side A
8
/
].
8
/
].
8
].
To re-record
Normal tape
Adhesive tape
11