Vizio E400-B2 Quick Start Manual page 7

2 3
Align the neck with the base and snap it Align the neck piece with the slot in the bottom of
into place. the TV and slide it into place as shown.
Using a Phillips screwdriver, insert Using a Phillips screwdriver, insert the remaining
three (3) screws into holes on the bottom of four (4) screws into the holes on the back of the TV
the base and tighten them to secure it to and tighten them to secure the neck to the TV.
the neck.
When you are finished, place the TV on a stable,
level surface.