Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. Avoid unintentional starting. Before installing the Wheel Kit, be sure the engine switch is in the Off position. SKU 94192 For technical questions, please call 1-800-444-3353 Specifications Description 2 –...
When unpacking, check to make sure the following parts are included. Refer to the Parts List and Assembly Drawing at the end of this manual. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Page 4
Place each Wheel (50) over the end of the Axle and secure in place with another Pin (51). Bend Pin so it cannot fall out. Air Valve (30 PSI) Wheel (50) Pin (51) SKU 94192 For technical questions, please call 1-800-444-3353 Frame Cross Bracket Axle (49) Axle Bracket (53)
To move the Generator, lift the front end by the Handle (61) and pull it forward, then set the Generator down on the two front feet. Warning: The Handle must be used for hand pulling only. Do not attach to a vehicle. Not for highway use. SKU 94192 For technical questions, please call 1-800-444-3353 Bracket (56) Nut (57)
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 94192 For technical questions, please call 1-800-444-3353 Maintenance...