Charge The Battery; Minisd Card - Nokia 6265i User Manual

S e t u p y o u r p h o n e

Charge the battery

1. Plug the charger transformer into a standard ac outlet.
2. Insert the charger
output plug into
the round jack at
the bottom end of
the phone.
If necessary, you can
use a CA-44 adapter
cable (1) to connect a
charger and the phone.
After a few seconds,
the battery indicator
in the display scrolls.
If the battery is
completely discharged,
it may take a few
minutes before the
charging indicator
appears on the display or before any calls can be made.

■ MiniSD card

To insert the miniSD, complete the following steps.
1. Slide open the phone and lift open the miniSD
slot cover.
2. Insert card firmly as shown in the illustration.
The card clicks into place.
To remove miniSD card, firmly press the card until it
releases from card slot and slides out.
Important: Do not remove the memory card
while reading or writing to the card. Doing
so may cause data corruption on the card or
the phone.
Note: Use only miniSD cards approved by
Nokia for use with this device. Nokia utilizes the approved industry
standards for memory cards but not all other brands may function
correctly or be fully compatible with this device.
16