Panasonic LUMIX DMC-TS1 Operating Instructions Manual page 159

∫ Disconnecting the USB connection cable safely
•
Proceed with the hardware removal using "Safely Remove Hardware" on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of
the digital camera before removing the hardware.
Note
•
Turn the camera off before connecting or disconnecting the AC adaptor (optional).
•
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
•
If the camera is connected in clipboard mode, the built-in memory data is displayed even if a
card is inserted.
•
HDMI connection is disabled and connection with the USB connection cable will take priority
when you connect the USB connection cable while the HDMI mini cable is connected (P148).
∫ Viewing the contents of the built-in memory or card using the PC (folder
composition)
Folders and images processed in the PC cannot be played back on the camera. It is
recommended to use the "
CD-ROM (supplied) when you write the image from PC to a card.
A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET] (P33)
•
When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
•
When there is a picture with file number 999 inside the folder
Connecting to other equipment
PHOTOfunSTUDIO 3.0 HD Edition
1
2
3
MISC:
PRIVATE1:
(Built in memory only)
AVCHD:
in the [SETUP] menu has been executed
- 159 -
" bundled software on the
Folder number
File number
JPG: Pictures
MOV: Motion pictures
DPOF print
Favourite
Clipboard pictures
[AVCHD Lite] Motion
pictures