Using Common Interface - Panasonic Viera TX-L32EM5E Operating Instructions Manual

Using Common Interface

The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules.
This function may not be available in some countries or regions.
Video and audio signals may not be output depending on broadcasts or services.
Although CI module may enable you to view some services, this TV does not guarantee all services (e.g. encrypted
pay-TV channels).
Please use only the approved CI module by the broadcaster.
Consult your local Panasonic dealer or broadcasters for more information and conditions of the services.
Caution
Turn off Standby On / Off switch whenever inserting or
removing the CI module.
If a view card and a card reader come as a set, first
insert the card reader, then insert the view card into the
card reader.
Insert the module in the correct direction.
Remove the CI module from the TV when placing the
TV facing upward. This may cause damages to the CI
module and CI slot.
Insert the CI module (optional)
The features that appear on screen are dependent on the contents of the selected CI module.
Normally encrypted channels will appear. Follow the on-screen instructions.
If encrypted channel does not appear, perform below.
For more details, read the manual of the CI module, or check with the broadcaster.
Select the mode
1
(p. 15)
TV
Display the menu and select [Setup]
2
Select [System Menu]
3
Setup Menu
System Menu Access
Select [Common Interface]
4
System Menu
Common Interface
Access Common Interface and follow the on-screen instructions
5
Common Interface
Slot 1: Module inserted
On-screen instructions may not correspond to the remote control buttons.
Main Menu
Setup
Access
Rear of the TV
Insert or remove straightly
and completely
select
access
select
access
select
access
CI slot
CI module
37