Retuning From Setup Menu - Panasonic Viera TX-L32EM5E Operating Instructions Manual

Retuning from Setup Menu

Automatically retune the channels received in the area.
This function is available if channel tuning is already performed.
Only the selected mode is retuned. All the previous tuning settings are erased.
If Child Lock PIN number (p. 36) has been set, the PIN number is required.
If tuning has not been done completely
Select the mode
1
(p. 15)
TV
Display the menu and select [Setup]
2
Select [Tuning Menu]
3
Setup Menu
Tuning Menu Access
Set [TV Selection] to the signal you want to tune
4
Tuning Menu
TV Selection
Select [Automatic Channel Search]
5
Tuning Menu
Automatic Channel Search Access
Select the provider (Cable only)
6
Set the settings for Automatic Channel Search (Cable only) and
7
start tuning
Automatic Channel Search
Scan
Scan Mode
Frequency (KHz)
Network ID
Scan
[Scan Mode]
[Full]: Scans the whole frequency range. Settings are made automatically. [Frequency] and [Network ID] are
not available.
[Quick]: Scans according to the settings you made in [Network ID].
[Advance]: Scans according to the settings you made in [Frequency] and [Network ID].
Normally set [Frequency] and [Network ID] to [Auto].
If [Auto] is not displayed or if necessary, enter the value specified by your cable provider with numeric buttons.
After settings, select [Scan].
[Analogue Manual Tuning] (p. 34)
Main Menu
Picture
Sound
Setup
Antenna
0%
The function items vary depending on the country you select (p. 13).
Advance
306000
Auto
select
access
select
access
select
set
select
access
select
set
access
31