Functions And Settings; Using "Whisper-Mode Surround; Using "Game; Muting - Panasonic SC-HTX5 Operating Instructions Manual

Functions and settings

To return to the previous
display/To cancel during setting
operation (➜ page 21):
Press [ RETURN].
20
RQT9478

Using "WHISPER-MODE SURROUND"

This function is effective during surround playback only. You can enjoy the dynamic effect
even if the sound volume level is low during surround playback.
Press [WHISPER-MODE SURROUND].
"W.S. ON " is displayed.
To cancel Press again.
If cancelled, "W.S. OFF " is displayed.
This setting can be made on the control panel as well.
Control panel
[WHISPER-MODE SURROUND] indicator
Note
WHISPER-MODE SURROUND is not effective in the following cases.
When not using the wireless surround speakers:
When Dolby Virtual Speaker is off
When using the wireless surround speakers:
When Dolby Pro Logic
If the above setting is made when this function is on, [WHISPER-MODE SURROUND]
indicator disappears and this function temporarily becomes off.

Using "GAME"

Enjoy gaming with more dynamic sound.
Press [GAME].
• "GAME " mode (➜ page 17) in SFC is selected.
To cancel Press again.
If cancelled, SFC's effect itself is cancelled.

Muting

"MUTE " blinks on the display while the volume is muted.
Press [MUTE].
To cancel
Press again.
Note
• Muting is cancelled when you switch the system to standby.
• Muting is also cancelled when you adjust the volume.
Adjusting speaker (subwoofer, wireless surround
speaker) output during playback
Depending on the playback signal, you may feel the volume of the subwoofer or surround
speakers (when used ➜ page 14) is not balanced with the volume of the front speakers. In
this case, you can adjust the speaker volume during playback.
1. Press [CH] to select a speaker for adjustment.
(The speaker is switched each time you press the button.)
When not using the wireless surround speakers: SUBW (Subwoofer)
When using the wireless surround speakers (➜ page 14):
SUBW (Subwoofer)
2. Press [SPEAKER LEVEL +, –] to adjust each speaker's output level.
Adjustment range: SUBW: OFF, MIN, 1 to 19, MAX
RS, LS: –10 to +10
Repeat steps 1 and 2 to adjust the level of each speaker.
Note
• You cannot adjust the front speakers with this operation. To adjust the volume balance of left
and right front speakers, see "Adjusting the volume balance of front speakers". (➜ page 21)
• There is no output from the subwoofer if you select "OFF ".
• If the sound is distorted, lower the level.
• You cannot adjust the output level of speakers if the sound fi eld effect is off and the
speakers' audio output is set to off. (➜ page 17)
• You can adjust the speaker's output level in SFC's each mode respectively. (➜ page 17)
• When this function is on, [WHISPER-
VOLUME
MODE SURROUND] indicator lights
WHISPER-MODE INPUT
SURROUND SELECTOR
up on the control panel.
Press
and SFC are off with 2-channel signal input
RS (Wireless surround right) LS (Wireless surround left)