Using Voice Recognition - JVC KW-R700BT Instructions Manual

Making a call from memory
You can store up to 6 contacts in the memory of
this unit for speed dialing.
To store contacts in memory
1 Enter the "Hands-Free" menu.
2 Select a call method.
3 Select a contact (name/phone number).
Name
4 Store in memory.
(Hold)
"MEMORY PX" flashes. The contact is stored to the
selected number button (1 - 6).
To erase a contact from preset memory, select
<DIAL NUMBER> in step 2 and store a blank
number.
To make a call from memory
1 Enter the "Hands-Free" menu.
2 Select and call the contact.
"NO PRESET" appears if there are no contacts
stored in memory.

Using voice recognition

You can use the voice recognition features of the
connected phone through this unit.
"NOT SUPPORT" appears if the connected
phone does not support this feature.
1 Enter voice recognition mode.
If only one phone is connected,
(Hold)
<DIALED>/
<RECEIVED>/
<MISSED CALL>/
<PHONEBOOK>/
<DIAL NUMBER>
Phone Number
or
Bluetooth mobile phone
If two phones are connected,
Enter "phone list"
(Hold)
2 When "WAIT VOICE" "[Device Name]"
scrolls on the display, speak the name of
the contact you want to call or the voice
command to control the phone functions.
Supported voice recognition features vary for
each phone. Please refer to the instruction
manual of the connected phone for details.
Deleting a contact (name/
phone number)
Only when <P.BOOK SEL> is set to <P.BOOK IN
UNIT>. ( page 16)
1 Enter the "Hands-Free" menu.
2 Select a call method.
3 Select the contact (name/phone number)
to be deleted.
Name
4 Enter "Delete Entries" menu.
(Hold)
5 Select <DELETE> or <DELETE ALL>.
DELETE Selected name/phone number
from step 3 is deleted.
DELETE All name/phone numbers from
ALL selected menu in step 2 are
deleted.
Select the desired phone
<DIALED>/
<RECEIVED>/
<MISSED CALL>/
<PHONEBOOK>
Phone Number
or
ENGLISH | 15