General Settings - Psm; Basic Procedure - JVC KD-G416 Instructions Manual

General settings — PSM

Basic procedure

You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2
Select a PSM item.
Indications
DEMO
Display demonstration
CLOCK H
Hour adjustment
CLOCK M
Minute adjustment
DIMMER
Dimmer
SCROLL*
Scroll
TAG DISP
Tag display
AMP GAIN
Amplifier gain control
* Some characters or symbols will not be shown (and will be blanked) on the display.
(Ex. "ABCå!d#" ]"ABCA D ".)
18
3
4
5
Selectable settings, [reference page]
DEMO ON: [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [8].
DEMO OFF: Cancels.
1 – 12, [8]
[Initial: 1 (1:00)]
00 – 59, [8]
[Initial: 00 (1:00)]
ON:
Activates dimmer.
OFF: [Initial]; Cancels.
ONCE: [Initial]; Scrolls the disc information once.
AUTO: Repeats scrolling (5-seconds interval in between).
OFF: Cancels.
• Pressing DISP for more than one second can scroll the display
regardless of the setting.
TAG ON:
[Initial]; Shows the ID3 tag while playing
MP3/WMA tracks, [14].
TAG OFF:
Cancels.
You can change the maximum volume level of this receiver.
LOW PWR: VOL 00 – VOL 30 (Select this if the maximum
power of the speaker is less than 50 W to prevent
them from damaging the speaker.)
HIGH PWR: [Initial]; VOL 00 – VOL 50
Adjust the PSM item selected.
2
Repeat steps and
other PSM items if necessary.
Finish the procedure.
3
to adjust the