3D Settings - Panasonic TX-L42FT60E Ehelp

■
To change 3D format manually
When the image is not changed properly using
manual setting.
1. Display the 3D Mode Selection (Manual)
above operation
2. Select the mode with
Original:
Displays the source image as it is.
Use to identify the format type of the source image.
●
Watching
Side by Side - 3D / Side by Side - 2D
Top and Bottom - 2D:
Displays the mode you select.
Not valid in Analogue and AV mode
●
2D 3D:
Converts 2D images into 3D.
Please note the 3D images appear slightly different from the originals.
●
Using this function for profit-making purposes, or publically showing images
●
converted from 2D to 3D in places such as shops or hotels etc. may
infringe on the rights of the copyright holder protected under copyright law.

3D Settings

1. Display the menu with
2. Select Picture
3. Select one of the following items with
3D Detection / 3D Signal Message
L/R Picture Swap
4. Set with / /
To exit the menu screen
●
EXIT
3D Detection
(On (Advance) / On
Selects whether to switch to the 3D mode automatically or not.
On (Advance):
Detects all the 3D format signals and displays the 3D image automatically.
/ and press
3D Source image format
/ Top and Bottom - 3D
MENU
3D Settings with /
/ 2D 3D Depth
/ Edge Smoother /
/ and press OK
/ Off)
- 51 -
3D / 2D mode, use this
screen with
OK to set
and press OK to access
/ and press OK
/ 3D Adjustment
Safety Precautions
to store
(red) during
/
to access
/