You can only select photos of the same recorded date and the same pixels.
●
You may not be able to view the created 3D photo properly if you select
●
photos for L and R in reverse.
4. Create the 3D photo with
If your selected photos are not suitable for the 3D photo, the error
●
message will be displayed and you will return to the photo selection
screen (step 3).
To save the 3D photo in the SD Card, press
●
screen instructions.
After the photo is saved, the photo selection screen will be displayed
●
(step 3). Select photos again to create another 3D photo or exit from
Multi Shot 3D
■
To enjoy the saved 3D photos
Saved 3D photos are displayed in the thumbnail view. Wear the 3D Eyewear
and enjoy the 3D photos.
Using slideshow
Slideshow ends when all photos within the current thumbnail are viewed.
1. Select the file from the thumbnail of photos for the first view with
/
2. Start Slideshow with
To display / hide the operation guide
●
To pause (return to Single view)
●
OK
To return to thumbnail
●
BACK/RETURN
You can change the back ground music by setting
●
in
Slideshow Settings
■
Slideshow Settings
Set up the settings for Photo mode.
1. Display the option menu with
2. Select
Slideshow Settings
3. Select one of the following items with
Frame
/
Colour Effect
Burst Playback
/
OK
mode.
(red) and
OK
(see below).
OPTION
with
OK
/
Transition Effect
Interval
/
Repeat
/
Back Ground Music
- 117 -
OK
and follow the on-
Back Ground Music
/
and press
OK
to access
/
Auto Makeup
/
Screen Mode
/
/
/