Table of Contents
Advertisement
ª Using the specified external
flashes
• When you use the following external
flashes, the information about the ISO
sensitivity, the aperture value or other
on the camera is transferred to the
flash and then you can use various
functions of the flash such as the
adjustment of the range of the light
control according to the aperture value
or the display of the range of the light
control.
Flashes
Adaptor
Metz
SCA3502
54MZ-3
Metz
SCA3502
44MZ-2
Metz
SCA3502
70MZ-5
LEICA
Not
SF-20
needed
LEICA
Not
SF-24D
needed
Others
ª Available external flash settings
• Set the mode on the external flash to
either of Auto or Manual. (The [TTL]
Conditions
mode cannot be activated properly.
However, TTL/GNC mode can be also
AUTO
used for SF-24D only.)
• Any exposure mode can be set on the
AUTO
camera.
• Different aperture values may be
displayed between the camera and the
AUTO
external flash, but flash can be
activated properly.
AUTO
AUTO,
TTL-GNC
108
±
±
±
±
±
±
±
±
j
±
±
±
j
±
j
±
Advertisement
Table of Contents
