Advertisement
D i s p l a y
Chronograph hands
Timer
12 hours
Timer 60 seconds
Seconds
Hours
Watch hands
*According to series
Timer
30 minutes
A
B
Minutes
Date*
T o s e t t h e t i m e a n d d a t e
The 0 position only concerns models with a
screw-in crown (Link-Kirium-2000)
If your chronograph is equipped with a screw-in
crown, please make sure that the crown is
correctly screwed in order to garantee water-
resistance to 200 meters. Unscrew the crown
to place in position 1.
The 0 position does not concern models without
a screw-in crown: Monza-Monaco-Targa Florio-Carrera.
Position 1: Normal position and manual winding
This position allows you to wind your watch manually by rapidly rotating the
crown. Pull the crown out once more to place in position 2.
Attention: Contrary to most calibers, use intermediary position 2
to correct the time and not the fully pulled out position 3.
Position 2: Time correction
Turn the crown forwards to backwards according to the desired correction.
Pull the crown out once more to place in position 3.
Position 3: Rapid date correction
Turn the crown clock wise to correct the date.
Please remember to ALWAYS push the crown back to position 1 and to screw
in to position 0 if your watch has a screw-in crown.
7
A
B
Hide quick links:
Advertisement
