Setup Menu - Panasonic SDR-S7 Operating Instructions Manual

Others

SETUP menu

Item
DISPLAY
DATE/TIME
DATE FORMAT
FORMAT CARD
QUICK START
POWER SAVE
BEEP SOUND
POWER LCD
LCD SET
TV ASPECT
EXT. DISPLAY
RESUME PLAY
INITIAL SET
DEMO MODE
78
VQT1R13
1
Menus
Display current information or settings on the LCD monitor.
• Even when this item is set to [OFF], the operating status, date
and world time will remain displayed.
Select the date and time display mode.
Select the date display format.
Format SD cards.
Start recording instantly.
Turn off the unit if the unit is not being operated.
This function does not work in the following cases.
• While using the AC adaptor
• While connected to a computer or printer via USB
Allow operations such as starting and ending recording to be
signaled by a beep.
When [ON]
Beep:
Beep-Beep: • When recording stops or the unit is turned off
Beep-Beep, Beep-Beep ... (4 times consecutively):
Brighten the LCD monitor more than usual.
Adjust brightness or colour density of the LCD monitor.
Display images at the aspect ratio of a connected TV.
Display information on a connected TV.
Continue playback from the point it was stopped.
Return all settings except for [LANGUAGE] and [CLOCK SET] to
their defaults at the time of purchase.
Display an introduction to the unit (demonstration mode).
The demonstration stops when any operation except pressing the
[AUTO] or [MANUAL AF/MF] button is performed, but it will resume
if no operations are performed for approx. 10 or more minutes.
(cont.)
Purpose
• When recording starts or the unit is turned on
• When a computer or printer is recognised
• If an error that prevents recording occurs, etc. Check
the message (P.82) that appears on the LCD monitor.