Download Print this page

Harbor Freight Tools 66838 Instructions And Precautions

Sit/stand rolling walker

Advertisement

Quick Links

SIT/STAND
ROLLING WALKER
INSTRucTIONS AND pREcAuTIONS
Distributed exclusively by Harbor Freight Tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
SAVE THESE INSTRucTIONS.
READ ALL pREcAuTIONS
AND INSTRucTIONS.
©
Copyright
2009 by Harbor Freight Tools
rights reserved. No portion of this document or any
artwork contained herein may be reproduced in any
shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this document
may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the
product described herein. Tools required for assembly
and service may not be included.
For technical questions or replacement parts, please
call 1-800-444-3353
66838
®
®
. All

SpEcIFIcATIONS

Weight Capacity
Handle Height Adjustment
uNpAcKING
When unpacking, make sure item is intact
and undamaged. If parts are missing or broken,
call Harbor Freight Tools at 1-800-444-3353.
ImpORTANT SAFETY
INFORmATION
1.
Assemble according to these instructions.
Improper assembly can create hazards.
2.
WARNING!
by a person who has the physical capability
to safely walk and sit on this device.
3.
Do not exceed 225 lb. weight capacity.
aware of dynamic loading! Sudden load
movement may briefly create excess load
causing product failure
4.
use as intended only; Walker is not a
wheel chair. Do not use to carry people.
5.
Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
6.
Make sure Walker is fully opened, Seat is
down and folding bar beneath Seat is locked
before use.
7.
Make sure Handles are of equal height
before use. If one is lower than the other,
.
adjust accordingly. Apply gentle pressure to
Handles to test Walker stability before use.
8.
Test Brakes before use. If Wheels turn while
Brakes are locked, have an authorized tech-
nician adjust Brakes. DO NOT use Walker if
Brakes do not work properly.
9.
Lock Brakes before sitting on Seat. Do not sit
on Seat unless you on even, level ground.
10.
Inspect before every use; do not use if parts
are loose or damaged. Check tires regularly
and replace when worn.
11.
This product is not a toy. Do not allow chil-
dren to play with or near this item.
12.
Maintain product labels and nameplates.
These carry important safety information.
225 lb.
6 Positions
This product should only be used
Be

Advertisement

loading

Summary of Contents for Harbor Freight Tools 66838

  • Page 1: Specifications

    Harbor Freight Tools. Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
  • Page 2: Assembly Instructions

    Front Frame and fasten into place by inserting the Retainer Pins (14). See Figure 2, below. Figure 2 SKU 66838 For technical questions, please call 1-800-444-3353. Use the Fasteners (26) to clasp the Basket (25) or PVC Bag (51) to the Cross Bolt (27) and the Back Frame (18).
  • Page 3 Walker while brakes are not functioning properly can lead to brake failure and possible personal injury and property damage. SKU 66838 For technical questions, please call 1-800-444-3353. cLEANING AND STORING Clean Walker use a soft, damp cloth. Remove Basket or Bag and fold Walker. To fold, pull on tie cord wrapped around Support Axle (42).
  • Page 4 Front frame Back frame Pipe stopper M6 Locknut Screw Washer Rivet Rope Basket Fastener Round cross bolt SKU 66838 For technical questions, please call 1-800-444-3353. part Description Brake loop pothook Turning axles Front fork cover Front fork Bearing 2 sets Locknut...