Switching On The Tv And Automatically Tuning - Sony FD Trinitron KV-32CS70B Service Manual

Switching on the TV and Automatically Tuning

The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to:
1) choose the language of the menu screen, 2) adjust the picture slant 3) search for and store all
available channels (TV Broadcasts) and 4) change the order in which the channels (TV Broadcasts)
appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by selecting the
appropriate option in the (Set Up menu) or by pressing the Auto Start Up Button
1
Connect the TV plug to the mains socket (220-240V AC, 50Hz).
The first time that the TV set is connected, it is usually turned on.
If the TV is off, press the on/off button on the TV set to turn on
the TV.
The first time you switch on the TV, a Language menu appears
automatically on the TV screen.
Press the v or V button on the remote control to select the
2
language, then press the OK button to confirm your selection.
From now on all the menus will appear in the selected language.
3 Because of the earth's magnetism, the picture might slant. The
Picture Rotation menu allows you to correct the picture slant if it
is necessary.
If it is not necessary, press the v or V button to select Not
a)
necessary and press OK.
If it is necessary, press the v or V button to select Adjust now,
b)
then press OK and correct any slant of the picture between –5
and +5 by pressing the v or V button. Finally press OK to store.
4 The Auto Tuning menu appears on the screen. Press the OK
button to select Yes.
on the TV set.
GB
Language
i
Svenska
Norsk
English
Nederlands
Français
Italiano
i
Select Language:
OK
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
OK
Do you want to start
automatic tuning?
Yes
No
OK
continued...
7
First Time Operation
Switching on the TV and Automatically Tuning
5 The TV starts to automatically search and store all available
broadcast channels for you.
This procedure could take some minutes. Please be patient
and do not press any buttons, otherwise the automatic tuning
will not be completed.
If no channels were found during the auto tuning process then
a new menu appears automatically on the screen asking you
to connect the aerial. Please connect the aerial (see page 6)
and press OK. The auto tuning process starts again.
6 After all available channels are captured and stored, the
Programme Sorting menu appears automatically on the
screen enabling you to change the order in which the
channels appear on the screen.
a)
If you wish to keep the broadcast channels in their tuned order,
go to step 7.
b) If you wish to store the channels in a different order:
1 Press the v or V button to select the programme number that
has the channel (TV Broadcast) you wish to rearrange, then
press the b button.
2 Press the v or V button to to select the new programme
number position for your selected channel (TV Broadcast),
then press the B button.
3 Repeat steps b)1 and b)2 if you wish to change the order of
the other channels.
7 Press the MENU button to remove the menu from the screen.
Your TV is now ready for use.
8
First Time Operation
Auto Tuning
Programme: 01
System: I
Channel: C21
Searching...
No channel found
Please connect aerial
Confirm
OK
Programme Sorting
Programme:
01 BBC ONE
02 BBC 2
03 ITV 1
04 CH 4
05 Five
06 ITV 2
Select channel:
OK
Exit: MENU
Programme Sorting
Programme:
01 BBC ONE
02 BBC 2
03 ITV 1
04 CH 4
05 Five
06 ITV 2
Select new position:
OK
Exit: MENU
MENU