Sony Ericsson User Manual page 73

Operation modes
The following operation modes are available:
• Off – the phone cannot send or receive
any information.
• Automatic – the Bluetooth function is turned on
automatically when you start sending information such
as a business card or when you answer or make a call
via the Bluetooth handsfree.
• On – the Bluetooth function is on all the time (until you
change the mode). Other paired Bluetooth devices can
initiate a connection to the phone. The phone has to be
in On mode when you use Voice dialling via a
Bluetooth handsfree or dial-up networking on
a computer.
Note: In countries or districts where the use of
Bluetooth wireless technology is not allowed, you must
ensure that the Bluetooth function is set to Off.
The On mode reduces the standby time and talk time.
• To change the operation mode, scroll to Connect/
Bluetooth/Options/Operation mode.
This is the Internet version of the user's guide. © Print only for private use.
In order for your phone to be detected by other
Bluetooth devices, to receive items from paired or
unpaired devices or to accept pairing, you must make
your phone discoverable.
To make the phone discoverable
• Scroll to Connect,
YES
. Your phone is discoverable for three minutes.
YES
Searching for devices
You can search for Bluetooth devices and then, for
example, pair the device with your phone.
• To search for devices, scroll to Connect/Bluetooth/
Discover.
Sending and receiving
To send an item using Bluetooth wireless technology,
you need to make sure that the devices are within 10
metres of each other and that the operation mode is set
to Automatic or On.
To send an item
• After you select Bluetooth as the transfer method, the
phone searches for devices. A list of devices appears.
Transferring and exchanging information
, Bluetooth, , Discoverable,
YES
73