Sony Ericsson User Manual page 68

Using the WAP browser
To start browsing
1. First select the WAP profile you want to use. Scroll to
WAP services, , Select profile,
YES
2. Then select one of the following:
• Open your homepage.
• Go to one of your bookmarks. Select Bookmarks,
• Enter the address of a WAP site. Select Enter address,
, New address? to enter a new WAP address or
YES
select one of the 10 latest entered addresses.
Tip: When you enter a WAP address, the normal
http:// prefix is not needed. You do however need to
enter a prefix to use protocols such as ftp:// or https://.
To exit WAP
• Press and hold to exit and disconnect or
NO
• Press , select Exit WAP,
• Press again to remain connected and go to
YES
standby, (or press
NO
• Scroll to WAP services,
browsing again.
68 Using WAP
This is the Internet version of the user's guide. © Print only for private use.
.
YES
.
YES
to disconnect).
, Resume to continue
YES
Options when browsing
When you have started browsing, you can reach
different browsing options by pressing
The options menu is dynamic. Its content may vary
depending on which WAP site you are visiting.
The options menu always contains the following:
• Go to the homepage set for the current WAP profile.
.
• Bookmarks – Add the site you are currently browsing
YES
to your list of bookmarks, or see the list of bookmarks
for the current profile.
• Enter address – Enter the WAP address of a site you
want to visit.
• Save picture – Save a picture from the site.
• Send via SMS – Send a text message with a link to the
current WAP page to another phone.
• Send link – Send a link to the current site to another
phone via Bluetooth wireless technology or infrared.
• Reload – Refresh the contents of the WAP page.
• Exit WAP – Exit and go to standby or disconnect.
• Status – Display the current status, for example, how
long you have been browsing.
• Set as homepg – Set the current site as the homepage of
the WAP profile you are using.
.