Table of Contents
Advertisement
Finely Adjusting the White Balance
If you cannot acquire the desirable hue with white balance because of too many
different light sources, etc., adjust the fine white balance as follows.
Preparation
• Set the mode dial except for [
• Set the white balance to [
1
Press 3 until [
appears.
WB ADJUST.
RED
SELECT
WB
SET
Recording pictures (advanced)
]/[
]. (P30)
]/[
]/[
]/[
WB ADJUST.]
BLUE
EXIT
70
WB
]/[
]. (P67)
2
Adjust the white balance.
WB ADJUST.
RED
SELECT
WB
SET
• 1 [BLUE]: Press when the hue is
reddish.
• 2 [RED]: Press when the hue is
bluish.
• Close the function by pressing 4
after finishing the adjustment.
¬ Suggestions/Tips ¬
• The white balance icon turns red or
blue.
• You can set the value independently
for each of the modes in white
balance.
• When you set the white balance using
the White set [
level is set to "0".
• The adjusted picture will be close,
though may not be identical to the
actual picture.
BLUE
EXIT
], the adjustment
Advertisement
Table of Contents
