Table of Contents
Advertisement
Preparation
• Connect the camera to a printer. (P112)
• Set the DPOF print with this camera in advance. (P91)
• Set the paper size and print quality. (Read the printer operating instructions.)
ª DPOF picture
1
Select [DPOF PICTURE].
PictBridge
SINGLE
PICTURE
SELECT
WB
SET
• Press the [MENU] button, and you
can change the DPOF print setting.
(P91)
• When printing under the new
settings, disconnect the USB
connection cable and connect it to
the printer again.
¬ Suggestions/Tips ¬
• When the total number of prints becomes 1000 or more, the number of remaining
pictures may appear as [---] on the screen.
• When connecting to a printer not supporting DPOF, DPOF printing cannot be set.
(The DPOF print selecting screen does not appear.)
• Do not disconnect the USB connection cable when the cable disconnection
warning icon [
• When the [¥] indication lights in yellow during printing, check if there is no
malfunction on the printer.
• When the printer does not support the date printing by DPOF setting, the date may
not be printed as it is on date setting in DPOF setting.
• When you do not set the date print setting, also check the date print setting on the
printer.
Playback (advanced)
DPOF
PICTURE
SET
WB
SET
] is indicated.
2
Select [YES] and print.
PLS CHECK THE PRINTER
START PRINTING?
YES
SELECT
WB
SET
• Press the [DISPLAY] button to print
the date. (Only when connecting to
the printer supporting to printing
the date.)
• Press the [MENU] button to cancel
printing.
114
PictBridge
NO
DATE
DISPLAY
SET
WB
SET
Advertisement
Table of Contents
