Panasonic LUMIX DMC-FX55 Operating Instructions Manual page 83

3 Move 3/4/2/1 to move the
cursor to [EXIT] and then press
[MENU/SET] to end text input.
4 Press [MENU/SET] twice to close
the menu.
∫ Multi setting
1 Move 2/1 to select the picture
and then move 4 to SET/
CANCEL.
The [TITLE EDIT] icon A
[SET]
appears.
The [TITLE EDIT] icon A
[CANCEL]
disappears.
• Repeat this step.
• Titles cannot be changed or deleted in
[MULTI].
2 Press [MENU/SET].
• After performing step
2
step onwards in "Single setting"
(P82).
∫ Delete the title (for [SINGLE] only)
2
1 In step
when [SINGLE] (P82) is
selected, delete all the texts, select
[EXIT], and press [MENU/SET].
2 Press [MENU/SET] twice to close the
menu.
A
2
, perform
Example of text entry
In case of entering [LUMIX]:
1 Move 3/4/2/1 to move the cursor
to [L] and then press [MENU/SET].
2 Move 3/4/2/1 to move the cursor
to [U] and then press [MENU/SET].
3 Move 3/4/2/1 to move the cursor
to [M] and then press [MENU/SET].
4 Move 3/4/2/1 to move the cursor
to [I] and then press [MENU/SET].
5 Move 3/4/2/1 to move the cursor
to [X] and then press [MENU/SET].
• Registered text can be displayed on the
screen of this unit.
• Text can be scrolled if all of the registered
text does not fit on the screen.
• [BABY1]/[BABY2] (P47) or [PET] (P48)
name settings in scene mode can also be
registered by using the operation in steps
2 3
and when [SINGLE] (P82) is
selected.
• The name setting of [BABY1]/[BABY2]
(P47) or [PET] (P48) in scene mode and
[TITLE EDIT] cannot be registered at the
same time.
• You can use the software
[PHOTOfunSTUDIO-viewer-] on the
CD-ROM (supplied) to print the text
(comments). [For details, refer to the
operating instructions (PDF file) of the
software.]
• You can set up to 50 pictures at one time
with [MULTI].
• You cannot use title edit for the following
pictures.
– Pictures recorded with other
equipment
– Motion pictures
– Protected pictures
Advanced (Playback)
83
VQT1J72