Panasonic LUMIX DMC-FX38 Operating Instructions Manual page 29

[HISTOGRAM]
q [ECONOMY]
•
Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
•
[POWER SAVE] is set to [5MIN.] in the Intelligent auto mode and the clipboard mode.
•
[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•
The status indicator lights while the LCD monitor is turned off. Press any button to turn on the
LCD monitor again.
•
[AUTO LCD OFF] does not work while operating menu or playback zoom.
Preparation
This allows you to set either to display or not display the
histogram. (P50)
[OFF]/[ON]
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p [POWER SAVE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
- 29 -