[Protect] - Panasonic LUMIX DMC-FX38 Operating Instructions Manual

You can set protection for pictures you do not want to be deleted by mistake.
1
Select [PROTECT] on the [PLAYBACK] mode menu.
2
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
3
Select the picture, and then press
[MENU/SET].
When [MULTI] has been selected
•
Repeat these steps for each picture.
•
The settings are cancelled when [MENU/
SET] is pressed again.
4 Press [‚] to return to the menu screen.
•
Press [MENU/SET] to close the menu.
∫ Cancelling all the [PROTECT] settings
1
Select [CANCEL] on the screen shown in step
2 Press 3 to select [YES] and then press [MENU/SET].
3
Press [MENU/SET] to close the menu.
•
If you press [MENU/SET] while cancelling protection, the cancelling will stop halfway.
Note
•
The protect setting may not be effective on other equipment.
•
Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
•
Even if you do not protect pictures on an SD Memory Card or an SDHC Memory Card, they
cannot be deleted when the card's Write-Protect switch is set to [LOCK].
Advanced (Playback)

[PROTECT]

[SINGLE]
Press 2/1 to
select the picture.
2
- 121 -
(P24)
Press 3/4/2/1
to select the
pictures.
and then press [MENU/SET].
[MULTI]