The Remote Control; Set-Up - Panasonic SC-EN5 Operating Instructions Manual

The remote control

Battery
•
The battery holder of this remote control comes with a safety lock.
To open, use a pin (not included) or similar object to push into hole
A and pull out the battery holder.
•
Insert the battery with the positive (+) side facing down.
•
Do not use rechargeable type batteries.
CAUTION!
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT
TYPE RECOMMENDED BY THE MANUFACTURER.
DISCARD USED BATTERIES ACCORDING TO THE
MANUFACTURER'S INSTRUCTIONS.

Set-up

Connect the AC adaptor only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the speaker cords.
3
AC adaptor
To household
mains socket
AC adaptor
(included)
Note
The configuration of the AC adaptor differs
4
according to the area.
RQT6736
A
2
1
1
3
Use
30
Transmission
window
Aim at the sensor, avoiding obstacles, at a maximum range of 7
meters directly in front of the unit.
•
Keep the transmission window and the unit's sensor free from dust.
•
Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
Do not:
•
put heavy objects on the remote control.
•
take the remote control apart.
•
spill liquids onto the remote control.
1
AM loop antenna
Stand the antenna up on its
2
Speaker cords
Black
Red
Use only the supplied speakers.
The combination of the main unit and speakers
provide the best sound. Using other speakers can
damage the unit and sound quality will be
negatively affected.
Remote control
signal sensor
˚ ˚
30
About 7 meters in front of
the signal sensor
base.gfsjkgn
Red
Black
Copper (+)
1
2
Silver (–)
Silver (–)
Copper (+)