Table of Contents
Advertisement
3
Messages
Others
Message
CANNOT RECORD.
Writing on the SD card failed.
Neither motion pictures nor still pictures are recorded
on the SD card.
NO DATA.
Data is recorded on the SD card, but if this message
appears, the card may be unstable.
Turn the unit off and turn back on.
THIS CARD
An 8 MB or 16 MB SD card cannot be used in video
CANNOT RECORD
recording mode.
IN VIDEO MODE.
The SD card is not supported or cannot be recognised
CHECK CARD.
by the unit.
CARD LOCKED.
The SD card is write-protected. (P.15)
CARD FULL.
The SD card cannot be recorded on because it is full
SCENE NUMBER IS
or the numbers of scenes or numbers of scenes for
FULL.
the date has reached the maximum. Either delete
CANNOT RECORD.
unnecessary scenes or insert a new card. (P.54)
THE NUMBER OF
PROGRAM IS FULL.
Attention for waterproof:
Remove any foreign
objects from inside
Check the card/battery door.
the card door
before closing.
Attention for waterproof:
- maximum 2m
depth, 30 minutes.
Check the displayed message before using the unit
- all covers properly
underwater.
locked.
- clean inside covers.
●
Use a Panasonic SD card or other SD card
applicable for motion picture recording. (P.14)
ERROR
●
If this message appears when an applicable
OCCURRED.
card is used, it is recommended to format the
RECORDING IS
card. Formatting deletes all data on the SD card.
STOPPED.
Therefore, save data on a computer or other device
before formatting the card.
88
VQT2A30
What to check
This section explains the main messages appearing on the LCD monitor and
how to deal with them.
Message
EXIT THE MENU
THEN CHANGE TO
Functions that cannot be used simultaneously were
MANUAL MODE.
selected. (P.95)
CANCEL NIGHT
VIEW MODE.
PLEASE CONNECT
You tried connecting the unit to a computer without
AC ADAPTOR
connecting the AC adaptor.
ERROR
OCCURRED.
The unit detected an error. Eject the SD card and turn
PLEASE TURN UNIT
off the unit and turn back on.
OFF, THEN TURN
ON AGAIN.
DISCONNECT USB
The unit is not properly connected to a computer or printer.
CABLE.
Disconnect and reconnect the USB cable.
CANNOT OPERATE
The unit cannot be turned off while it is connected to
WHILE USB
a computer.
CONNECTED.
CARD ERROR HAS
The data on the SD card contains errors.
OCCURRED.
TO REPAIR THE CARD,
To repair the data, either use a battery with sufficient
PLEASE CONNECT
life or connect the AC adaptor. Depending on the
AC ADAPTOR OR
error, it may take time to repair the data.
CHANGE BATTERY.
The data has been repaired.
●
Depending on the situation, the data may not be
completely repaired.
NOW REPAIRING
●
If the unit is turned off without repairing data, data can
DATA.
be repaired the next time that the unit is turned on.
DO NOT REMOVE
●
If repairing fails, the data cannot be played back.
CARD.
Format the SD card with this unit.
●
Do not repair SD cards recorded on other devices
on this unit.
CANNOT CHECK
CONNECTED
DEVICE.
A device that cannot be used with this unit is
DISCONNECT THE
connected to the unit.
USB CABLE FROM
THIS UNIT.
What to check
89
VQT2A30
Advertisement
Table of Contents
