Table of Contents
Advertisement
Changing the clock setting
1 Press [MENU/SET].
2 Press 3/4 to select [CLOCK SET].
3 Press 1 and then perform steps
to set the clock.
4 Press [MENU/SET] to close the menu.
• You can also set the clock in the [SETUP]
menu.
(P18)
• When a fully charged battery has been
inserted for more than 24 hours, charging of
the built-in battery for the clock is completed
so the clock setting will be stored (in the
camera) for at least 3 months even if the
battery is removed. (If you insert a battery
that is not sufficiently charged, the length of
time that the clock setting is stored may
become less.) However the clock setting is
cancelled after this time. In this case, set the
clock again.
• You can set the year from 2000 to 2099. The
24-hour system is used.
• If the clock is not set, the correct date cannot
be printed when you stamp the date on the
pictures with [DATE STAMP]
photo studio to print the pictures.
Preparation
2
3
and
(P96)
or order a
- 15 -
Advertisement
Table of Contents
