[Copy] - Panasonic LUMIXDMC-FX100 Operating Instructions Manual

3 Press 2/1 to determine the
horizontal position and press the
shutter button to set.
• Use 3/4 to set the frame position for
pictures rotated vertically.
• The message [DELETE ORIGINAL
PICTURE?] appears.
4 Press 3/4 to select [YES] or [NO]
and then press [MENU/SET].
• The picture is overwritten when you select
[YES]. If you convert the aspect ratio of a
picture and then overwrite it, you cannot
restore it.
• A picture with the converted aspect ratio is
newly created when you select [NO].
• When the original picture is protected, you
cannot overwrite it. Select [NO] and newly
create a picture with the converted aspect
ratio.
5 Press [MENU/SET] twice to close
the menu.
• After converting the aspect ratio, the picture
size may become larger than that of the
original picture.
• Files that do not conform to the DCF
standard cannot be converted.
• You may not be able to convert pictures
taken on other equipment.
Advanced (Playback)

[COPY]

Copying the picture data
Press [
MENU
/SET
and select the item to set.
You can copy recorded picture data from the
built-in memory to a card or vice versa.
1 Press 3/4 to select the copy
destination and then press [MENU/
SET].
•
All the picture data in the built-in memory
are copied onto the card at one time. >
3
step
MENU
•
/SET
One picture at a time is copied from the
card to the built-in memory. > step
2 Press 2/1 to select the picture and
then press 4.
(Only when selecting [
3 Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
pictures are copied from the built-in
memory to a card.)
• The message [COPY THIS PICTURE TO
BUILT-IN MEMORY?] appears when you
copy pictures from the card to the built-in
memory.
- 105 -
] to display the [PLAY] mode menu
(P90)
:
.
:
MENU
/SET
2
.
])
MENU
/SET