Digital Output - Panasonic SC-DP1 Operating Instructions Manual

TVÍ
Í
TV/AV
SETUP
SETUP
PROGRAM
1 1
PLAY MODE
4 4
REPEAT
7 7
AUDIO SUBTITLE
P.MEMORY
TV VOL r
CANCEL
PAGE
TV
X
CH
ENTER
GUI DISP
DISPLAY TV VOL s
X W
SKIP
SHIFT
SURROUND
SHIFT
CINEMA D.ENH SUBWOOFER
Common procedures
See page 30 for menu and option details.
Preparation
Press [1 DVD/CD].
(When a disc is in the tray, press [1 DVD/CD] and press [∫].)
1
Press [SETUP] to show the menus.
Disc
SETUP
Audio
Subtitle
Menus
SELECT TAB
Ratings
ENTER RETURN
2
Press [2, 1] to select the menu's tab.
The screen changes to display the menu.
Disc Video
() ()
^------------------------------------------------------------------------------------------J
3
Press [3, 4] to select the item you
want to change and press [ENTER].
4
Press [3, 4, 2, 1] to select the
option and press [ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
CLOCK/ SLEEP
FPLAY
TIMER
2 2 3 3
5 5 6 6
Numbered
buttons
8 8 9 9
0 0 S 10 S 10
DVD/CD
GROUP
TV
W
ENTER ENTER
CH
RETURN
RETURN
ANGLE
QUICK REPLAY ZOOM
SLOW/SEARCH
DOUBLE
SOUND RE-MASTER
English
Automatic
English
Level 8
Audio Display Others
() ()
Entering a password (Ratings)
[DVD-V]
The password screen is shown when you select levels 0 to 7.
1 Input a 4-digit password with the numbered buttons and press
[ENTER].
≥If you enter a wrong number, press [SHIFT]i[CANCEL] to
erase it before you press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
≥Do not forget your password.
2 Press [ENTER] to confirm the 4 digits.
Now, when you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the television.
Follow the on-screen instructions.

Digital output

[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Change the settings when you have connected equipment through
this unit's OPTICAL OUT terminal.
PCM Digital Output
Select the maximum sampling frequency of PCM digital output.
Check the digital input limitations of the equipment you connect.
Off: When not connected digitally
Up to 48 kHz (factory preset):
Signals over 48 kHz converted to 48 or 44.1 kHz
Up to 96 kHz: Signals over 96 kHz converted to 48 or 44.1 kHz
Up to 192 kHz: Signals up to 192 kHz are output
[Note]
≥Signals from copy-protected discs are converted to 48 or 44.1 kHz
irrespective of the setting.
≥Some equipment cannot handle sampling frequencies of 88.2 kHz,
even if they can handle 96 kHz. Read your equipment's operating
instructions for details.
Dolby Digital, DTS Digital Surround and MPEG
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM (Factory preset for DTS Digital Surround and MPEG
Select if the equipment you connected cannot decode the signal.
§
MPEG: Only for the United Kingdom, Continental Europe, Russia,
Australia and N.Z.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to PCM. If not, signals the equipment
cannot process will be output by this unit, causing high levels
of noise which can damage your hearing and the speakers.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and
other world-wide patents issued and pending. "DTS" and "DTS
Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
§
§
):
RQT6817
31