Digital Output - Panasonic SC-DP1 Operating Instructions Manual

TVÍ
Í
TV/VIDEO
SETUP
SETUP
PROGRAM
1 1
PLAY MODE
4 4
REPEAT
7 7
AUDIO SUBTITLE
P.MEMORY
TV VOL r
CANCEL
PAGE
TV
X
ENTER ENTER
CH
ENTER
GUI DISP
DISPLAY TV VOL s
X W
SKIP
SHIFT
SURROUND
SHIFT
CINEMA D.ENH SUBWOOFER
Common procedures
See page 30 for menu and option details.
Preparation
Press [1 DVD/CD].
(When a disc is in the tray, press [1 DVD/CD] and press [∫].)
1
Press [SETUP] to show the menus.
2
Press [2, 1] to select the menu's tab.
The screen changes to display the menu.
Disc Video
() ()
^------------------------------------------------------------------------------------------J
3
Press [3, 4] to select the item you
want to change and press [ENTER].
4
Press [3, 4, 2, 1] to select the
option and press [ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
CLOCK/ SLEEP
FPLAY
TIMER
2 2 3 3
5 5 6 6
Numbered
buttons
8 8 9 9
0 0
S 10 S 10
DVD/CD
GROUP
TV
W
CH
RETURN
RETURN
ANGLE
QUICK REPLAY ZOOM
SLOW/SEARCH
DOUBLE
SOUND RE-MASTER
Audio Display Others
() ()
Entering a password (Ratings)
[DVD-V]
The password screen is shown when you select levels 0 to 7.
1 Input a 4-digit password with the numbered buttons and press
[ENTER].
≥If you enter a wrong number, press [SHIFT]i[CANCEL] to
erase it before you press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
≥Do not forget your password.
2 Press [ENTER] to confirm the 4 digits.
Now, when you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the television.
Follow the on-screen instructions.

Digital output

[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Change the settings when you have connected equipment through
this unit's OPTICAL OUT terminal.
PCM Digital Output
Select the maximum sampling frequency of PCM digital output.
Check the digital input limitations of the equipment you connect.
Off: When not connected digitally
Up to 48 kHz (factory preset):
Signals over 48 kHz converted to 48 or 44.1 kHz
Up to 96 kHz: Signals over 96 kHz converted to 48 or 44.1 kHz
Up to 192 kHz: Signals up to 192 kHz are output
[Note]
≥Signals from copy-protected discs are converted to 48 or 44.1 kHz
irrespective of the setting.
≥Some equipment cannot handle sampling frequencies of 88.2 kHz,
even if they can handle 96 kHz. Read your equipment's operating
instructions for details.
Dolby Digital and DTS Digital Surround
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM (Factory preset for DTS Digital Surround):
Select if the equipment you connected cannot decode the signal.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to PCM. If not, signals the equipment
cannot process will be output by this unit, causing high levels
of noise which can damage your hearing and the speakers.
RQT6815
31