Sanyo LCD-32XR10F Instruction Manual page 11

Connecting Headphones
Headphones
Connecting a USB device
To USB port
Connecting a MP3 player
MP3 player
Connecting a digital sound system
TV REAR
Coaxial cable
S/PDIF IN
(Coaxial)
Connections
To connect headphones:
TV Side
Insert the plug of the headphone into the TV's Headphone jack.
When using headphones, adjust the headphone volume so as to avoid
excessive levels, as hearing damage may result.
Insert your USB device into the USB port.
To play from the USB device:
1. Turn on your TV, then press SOURCE button. The Input Source
menu opens.
TV Side
2. Press 5
Never remove the USB device or turn off the TV while using the USB device.
Insert MP3 player headphone plug into the MUSIC jack on the side of the
TV. Be sure to insert fully, otherwise it may not sound right.
To listen to music from MP3 player through TV
1. Turn on your TV, then press SOURCE button. The Input Source
menu opens.
2. Press5 or6
3. Turn on your MP3 player and begin playing music. Refer to the
instructions that came with the MP3 player.
TV Side
For a full Home Theater sound experience, you must connect your
digital sound system to the S/PDIF OUT(Coaxial) terminal on the TV
rear.
Digital sound system
(Continued)
or6 to select USB, then press OK to confirm.
to select Music, then press OK to confirm.
Note: The S/PDIF OUT terminal only can output
digital TV program's audio.
11